2024 Mitutoyo Spring Promotion - Catalog - Page 6
Indicators
Calculation-Type Digimatic Indicator ID-C
†Calculation-Type Digimatic Indicator features both a key
lock and parameter lock.
†Fast measurement frequency up to 50 per second.
†An analog bar provides easy-to-read values
when scanning for Max, Min and TIR Values.
†Improved parameter setting software makes it even
easier to set all of the available parameters and
determine and upload the proper coefficients for
calculation. (optional) 21EZA313
†The ABSOLUTE Digimatic indicator performs internal
calculations using the formula Ax+B+Cx-1 (assuming
spindle displacement as x), while the specified
Order No.
Resolution
.00005/.0001/.0005”
543-342B-10
(0.001/0.01mm)
Selectable
10%
OFF
coefficients A, B and C can be set with respect to the
purpose of measurement or dimensions of the fixtures.
This unique feature allows for reading measurements
directly, without searching for conversions.
543-342B
ENABLED
Data Management Software by Mitutoyo
Range
Accuracy
Measuring Force
List
Promo
.5"/12.7mm
±.00010"/0.003mm
1.5N or less
$524.00
$471.60
10%
OFF
SPC cable – 1m: 905338 2m: 905409
Stem dia. 3/8" #4-48 UNF Thread
Bore Gage ABSOLUTE Digimatic Indicator ID-C
†Hold automatically picks up hole diameter after a
sweep.
†Bore Gage Digimatic Indicator features both a key
lock and parameter lock.
†Fast measurement frequency up to 50 per second.
†An analog bar indicator is integrated to enhance the
intuition in reading.
†Up to three sets of master values and upper/lower
tolerance values can be memorized.
Installed on
optional bore
gage probe
(page 9)
Order No.
543-312B-10
Resolution
Range
.00005/.0001/.0005”
(0.001/0.01mm) Selectable
†GO/NO-GO judgment
†Employing the ABSOLUTE linear encoder, the ID-C
always displays the spindle Absolute Position from
the origin at power-on.
†Improved parameter setting software makes it even
easier to set all of the available parameters and
determine and upload the proper coefficients for
calculation. (optional) 21EZA313
543-312B
ENABLED
Data Management Software by Mitutoyo
Accuracy
.5"/12.7mm ±.00010"/0.003mm
Measuring
Force
List
Promo
1.5N or less
$524.00
$471.60
SPC cable – 1m: 905338 2m: 905409
Peak Hold ABSOLUTE Digimatic Indicator ID-C
15%
OFF
With Max./Min. Value Holding Function
†Peak Hold Digimatic Indicator features both a Key Lock
and Parameter Lock.
†An analog bar provides easy-to-read values when
scanning for Max, Min and TIR Values.
†GO/NO-GO judgment
†The maximum, minimum or runout value can be
displayed during measurement.
Order No.
Resolution
Stem dia. 3/8", #4-48 UNF Thread
543-302-10
543-302B-10
.00005/.0001/.0005"
0.001/0.01mm
Selectable
Prices effective March 15, 2024 through June 28, 2024
6
†Fast measurement frequency up to 50 per second.
†Employing the ABSOLUTE linear encoder, the Signal ID-C
always displays the spindle Absolute Position from the
origin at power-on.
†Improved parameter setting software makes it even easier
to set all of the available parameters and then determine
and upload the proper coefficients for calculation.
(optional) 21EZA313
Range
Accuracy
Remarks
List
Promo
.5"/12.7mm
±.00010"/0.003mm
w/lug
$524.00
$445.40
.5"/12.7mm
±.00010"/0.003mm
Flat-back
$524.00
$445.40
SPC cable – 1m: 905338 2m: 905409
543-302B
ENABLED
Data Management Software by Mitutoyo